How to Change Heating Element in Oven

Instructions

  1. Remove the Heating Element Mounting Plate. The first step is to locate the baking heating element and the bracket that holds it in place at the bottom rear of the oven.
  2. Test for Electrical Current.
  3. Disconnect the Heating Element.
  4. Install the New Heating Element.
  5. Reattach the Mounting Plate and Test the Oven.

Can I Replace an Oven Element Yourself?

Replacing your oven heating element is not that difficult to do. Of course, you could have someone come into your home and do the work for you, but if you are reasonably competent with a screwdriver, you should have absolutely no problem in changing the heating element yourself.

Is it worth replacing an oven element? Repair is always an option, until the repairs cost more than the oven is worth. If your oven is constantly breaking down, it may mean that the unit is reaching the point of no return. Continually replacing parts and paying for repairs can add up quickly, so buying a new oven would just make more sense financially.

Is It Hard to Change an Element in an Oven?

An oven heating element is an essential, simple part that is easy to replace in most electric ovens and ranges. These are the parts responsible for creating the heat necessary for baking and broiling—they do their job simply by heating up as electric current passes through them.

Can i replace a cooker element myself? The design is simple and easy for a homeowner to replace. You can buy a replacement oven element through the oven manufacturer or through online appliance parts retailers.

How Do You Remove an Oven Element?

Open the oven door as far as it will go and unscrew the element from the side or bottom of the oven. It’s usually held by two or three screws, which are easy to turn with a phillips screwdriver. Once the element is free, pull it forward and pull apart the electrical connectors.

How Do You Take the Heating Element Out of an Electric Oven?

Gently pull the heating element and mounting bracket away from the back wall of the oven. Slide the element toward you a couple of inches, so you can see the wires connected to the element. The wires may be surrounded by insulation, which may pull out a bit—don’t worry, this is normal.

How do you remove an electric oven element? Disconnect the heating element you may be able to pull them off with your fingers, or you can use needle-nose pliers. Pull only on the metal connector; never pull on the wire itself, or you risk damaging it or separating it from its connector.

Remove the Oven Bake Element or Broil Element

  1. Step 1: Disconnect the Power. Turn off the power to the oven at the breaker box and unplug the oven.
  2. Step 2: Remove the Oven Element Mounting Screws.
  3. Step 3: Disconnect the Wiring.
  4. Step 4: Install the Oven Element Replacement.

Do I Need to Unplug My Oven to Change the Element?

Make sure all of the oven or range controls are off. Unplug the appliance at the wall outlet. On freestanding ranges, the cord is usually accessible if you remove the bottom drawer completely and reach through the drawer cavity from the front.

How hard is it to replace an oven heating element? Replacing a faulty element isn’t hard, but it can be a little tricky to manipulate some of the smaller parts within the tight confines of the oven. First, shut off the power to the oven at your home’s main breaker to ensure that you’re working safely. Then, identify and detach the old element.