How to Fix a Leaky Bathtub Faucet with Two Handles

If you’re working on a two-handled faucet, we recommend replacing the washers and seats in both the hot and cold valves.

  1. First, unscrew the packing nut.
  2. Second, remove the old seat washer screw and the old seat washer.
  3. Third, pull off the old bonnet washer, grease the new one and slide it in place.

How Do I Change a Bathtub Cartridge?

How to do it

  1. removing handle from faucet. Remove Handle.
  2. removing retaining clip. Remove Retaining Clip.
  3. remove cartridge with wrench. Remove Cartridge.
  4. replacing o-rings on cartridge. Replace O-Rings.
  5. installing new cartridge. Install New Cartridge.

Can you replace shower cartridge without turning off water? You can replace the shower cartridge without turning off water to the entire house. This will however only be possible if there are cold and hot water shut off valves on the shower valve. If the valve has no shut off valves you will need to turn off the entire house’s water supply.

How do i know if my tub cartridge is bad? There are several signs of a cartridge needing to be serviced or replaced. The most obvious is that you have a drip or running water when you turn the handle to the off position. You may also get a drip at the handle itself. Furthermore, you may feel the handle getting increasingly more difficult to turn.

Can i replace shower cartridge myself? A plumber can do a quick fix, but taking some easy steps to replace the shower valve yourself isn’t a bad idea. It is a way to save money and gain useful skills at the same time.

Professional plumbers charge $90 to $270 plus the cost of materials to replace a shower cartridge. Plumber cost to replace a shower cartridge.

Factor Average cost
Shower faucet cartridge $10 – $80
Plumber’s labor $90 – $270
Total $100 – $350

Why is My Faucet Dripping When the Water is Turned Off?

If you notice your bathroom sink drips or leaks out of the faucet head when turned off, there is likely an issue with the seal inside the faucet head, allowing the water to run through or drip. Before calling a professional plumber, consider whether you’re able to repair the leak in your bathroom sink yourself.

Why does my faucet continue to run after i turn it off? Kitchen faucet handle if the water continues to run after turning off the faucet, check if the handle is fully closed. The easy fix might be that you just need to reposition your kitchen faucet handle. If you confirm the faucet is in a closed position, try to turn it further.

Reasons Your Faucet Is Dripping Water & How To Fix It

  1. Deactivate the Water.
  2. Disassemble the Faucet Handles.
  3. Detach the Valve Stem.
  4. Inspect the Parts of the Sink.
  5. Replace the Damaged Parts.
  6. Sanitize the Valves.
  7. Put The Faucet Together.

Why is My Tub Spout Dripping?

A cracked or worn washer in the stem is a common source of a dripping bathtub faucet. Each time the water is turned on the washer is pushed against the valve. This repeated friction over time causes the washer to wear out. The tub faucet stem or cartridge itself may be the cause of the leak.