How to Fix a Whole in the Wall

Tiny nail and screw holes are the easiest to fix. Use a putty knife to fill them with spackling or wall joint compound. Allow the area to dry, then sand lightly. Anything larger must be covered with a bridging material for strength before patching compound can be applied.

What Materials Do You Need to Fix a Hole in the Wall?


  1. Construction Adhesive.
  2. Drywall Tape.
  3. Masking Tape.
  4. Drywall Screws.
  5. Joint Compound.
  6. Drywall Patch Kit.
  7. Drywall Scraps.
  8. Drywall Patch Plaster.

Is It Hard to Fix a Hole in the Wall?

This is not a difficult process but it is something that will take some time to complete because of the time that is required to allow the materials to dry. The working time required to complete the repair of the hole in the wall is about a half an hour to 45 minutes.

Is it easy to fix a hole in the wall? Small holes are quick and easy to fix with joint compound and a putty knife. Medium and large holes are more extensive and also require a piece of drywall to use as a patch. Both the prep and application processes are essential to achieving success.

How expensive is it to repair a hole in the wall? Depending on the extent of damage, it may cost $10 to $45 to repair small holes in drywall. If you have a small hole measuring just a few inches across, you can purchase a drywall repair kit from a home improvement store for $10 to $30.

How Much Does It Cost to Fix a Hole in the Wall?

Drywall hole repair costs $50 to $400 per patch, depending on the hole’s size and location: patching one small hole costs $50 to $150 or $200 to $650 for multiple holes. Fixing medium or large holes costs $200 to $400 per hole. Prices increase for drywall in difficult-to-access areas or with water damage.

How Do You Fix a Hole in a Wall Punch?

Holes Measuring 6 Inches or Less

  1. Cover the hole with a drywall repair patch, which can be found at major home improvement stores.
  2. Dip a putty knife in joint compound and spread a thin layer of joint compound over the drywall repair patch.
  3. Sand the dry joint compound with a sanding sponge or sandpaper.

Do-it-Yourself Drywall Repair

  1. Buy a drywall patch kit, putty knife, taping knife, sandpaper of varying grains, paintbrush/roller, screwdriver, doorstop, and drop cloth.
  2. Apply mesh over the hole.
  3. Putty over the mesh with drywall putty with a putty knife or taping knife.
  4. Wait for the joint compound to dry.
  5. Sand the area.

How Do I Fill a Hole in the Wall Perfectly?

How to fill deep holes in wall

  1. Clean the hole making sure you remove all loose materials.
  2. Use a flat edged filling tool to push the filler into the crack.
  3. Smooth it with a wet knife.
  4. Check the instructions to see how long it takes to dry – this should typically be around one or two hours.

What Do You Use to Fix a Big Hole in the Wall?

Small holes can be patched over with drywall tape or a self-adhesive drywall patch, but large holes need a more rigid material to span over the larger opening. The simplest solution is also the best: cutting a patch from another piece of drywall and securing it with wood backing strips and drywall screws.