How to Fix Water Damaged Swollen Wood Furniture

Water damage can leave shadowy white patches on wood. Ironing is one effective way to fix this particular problem. While air-drying your water damaged swollen wood furniture could take up to 24 hours, ironing should be a relatively quick alternative. Just take care not to burn yourself with the hot iron box.

How Do You Fix Water Bubbles on a Table?

Try fixing small bubbles or blisters by placing a damp cloth over them and going over the spot with a hot iron.

Can you fix water bubbles on wood table? Use an iron most people know how to use an iron safely, so it should be easy. Cover the swollen furniture with a wet rag and set your iron to a low-temperature setting. Hold the iron down on the rag for a few seconds. Be careful not to hold the iron in the same place for too long as this could further damage the wood.

  1. Lay a sheet of white parchment paper over the wood bubble.
  2. Continue ironing the parchment paper in 10-second intervals.
  3. Cover the wood bubble with two layers of masking tape, if the wood bubble remains.
  4. Make a split through the center of the entire wood bubble, using a very sharp razor knife.

How do you fix a water damaged table top? Mix a small amount of baking soda in a shallow bowl with just enough water to create a paste, stirring with a spoon. Dab a soft cloth into the paste and rub the substance onto the water damage, rubbing with the grain. Continue rubbing until the discoloration disappears, then wipe the paste away with a damp cloth.

How Do You Get Rid of Water Bumps on a Table?

Try fixing small bubbles or blisters by placing a damp cloth over them and going over the spot with a hot iron. This might reactivate the glue which no longer bonds the veneer to its base.

How can i get rid of a water soaked bump on a table? Removing water spots you may be able to remove water spots by gently rubbing with a damp cloth dipped in turpentine. Don’t leave the solution to dry, but instead wipe dry.

How Do You Fix Water Damage on Wood Furniture?

How to Repair Water Damaged Wood in 7 Simple Steps

  1. Step 1: Remove rotting wood.
  2. Step 2: Use auto filler putty.
  3. Step 3: Fill the hole.
  4. Step 4: Repeat steps 2 and 3.
  5. Step 5: Sand to a smooth finish.
  6. Step 6: Prime and paint.
  7. Step 7: Maintain your wood.
  8. A word about wooden furniture and water damage.

How Do You Fix a Water Bubble on a Wood Table?

How to Fix Water Damaged Swollen Wood Furniture

  1. Let Your Furniture Dry Out. Allow your water-damaged piece of furniture to dry before attempting to repair it.
  2. Sand the Wood & Apply Furniture Oil. Use sandpaper with a hand-sanding tool or your hand to rub your furniture piece.
  3. Use an Iron.