How to Install Hardie Plank Siding

Do You Nail or Screw Hardie Board?

Do you nail or screw hardie board? James hardie prefers and recommends installation of hardieplank® lap siding by the blind nailing technique, such that fasteners are hidden by the course above. Fasteners shall be installed between 1 in. And 3/4 in. From the top edge and no closer than 3/8 in.

Can you install hardie board with screws? Fasten hardiebacker sheets with proper nails or screws (as listed in ”materials required” in the backer installation instructions) every 8” around the perimeter and all supporting studs. Keep fasteners between 3/8” and 3/4” from sheet edges and 2” in from sheet corners.

What kind of fasteners do you use on hardie board? James hardie recommends 1-1/4” long galvanized or stainless steel roofing nails or 1-1/4” long ribbed waferhead screws in compliance with the tile industry. It is 8-18 x 3/8” hd.

Can I Install Hardie Siding Myself?

Can i install hardie siding myself? Fiberboard cement siding can be hand-nailed, but because it’s so much harder and more brittle than wood, you have to predrill holes near any edge. You can save yourself a bunch of time by using a pneumatic coil siding nail gun.

Is hardie siding easy to install? Joining hardie boards together is actually very easy, but there are a number of ways that contractors get it wrong; gaps: hardie boards should be joined in “moderate contact”. This means that the boards should be touching each other when they are installed. There is no need to leave a gap for expansion.

Is fiber cement siding hard to install? Nailing basics fiberboard cement siding can be hand-nailed, but because it’s so much harder and more brittle than wood, you have to predrill holes near any edge. You can save yourself a bunch of time by using a pneumatic coil siding nail gun.

How Do You Fasten Hardie Trim?

James hardie products can be hand nailed or fastened with a pneumatic tool. Pneumatic fastening is highly recommended. Set air pressure so that the fastener is driven snug with the surface of the trim. A flush mount attachment on the pneumatic tool is recommended.

Can You Use Screws on Hardie Plank?

Blind nailing is the preferred installation method for hardieplank. The term applies to a nailing/screwing method for joining hardieplank planks to hide nail or screw fasteners. Use a number 8, 1-1/4-inch-long by 0.375-inch-wide (hd) ribbed wafer-head (or equivalent) screw on steel studs.

Can you use screws on fiber cement siding? Fiber cement siding can be nailed by hand or with a pneumatic nailer. It can also be attached using corrosion resistant screws. Use hot-dipped galvanized or stainless steel nails.

Can you attach things to hardie board? Generally speaking, items can be attached to hardie® siding by using either corrosion resistant nails or screws. The fasteners must be long enough to go through the siding and into wood or metal substrate (e.g. Sheathing or studs).

How Do You Fasten Hardie Board?

Fasten the siding – you can fasten it with a pneumatic nailer or nailing by hand. You can use corrosion-resistant screws, or you can use stainless steel or hot-dipped galvanized nails. You can nail the siding by either blind nailing it at the top or face nailing it at the bottom.