Table of Contents
The model/series number is usually a four or five digit number and can be followed by letters. On the underside of the spout, the series number may be found. There is a decorative ring at the bottom of the spout that has a series number on it.
How Do I Know Which Single Faucet Moen Cartridge That I Need?
The easiest way to find the moen shower valve replacement cartridge you need is to know the series or model number of your moen bathroom faucet. Exact information for these comes with any paperwork you have received when you first installed the original shower faucet (hopefully you saved it).
Do all moen faucets have the same cartridge? Moen shower faucets cartridges are not universal and therefore not interchangeable. While the moen 1200 cartridge is interchangeable with the moen 1225 cartridge (its improved version), the moen 1222 and 1225 cartridges cannot be interchanged. The faucets they are installed in work differently.
Is there a difference between moen 1225 and 1225b? Q:what is the difference between 1225 b cartridge and 1225 ? a: according to moen, they are the same cartridge. There used to be a difference in the packaging (bulk pack vs retail pack), but the packaging is even the same now.
How do i identify my faucet cartridge? If you cannot locate any markings on the faucet, you’ll need to start disassembling it. Begin with the handle. You’ll be able to measure the cartridge (stem) length of the faucet or resort to the number of splines.
Is there a difference between moen 1222 and 1222b? There is absolutely no difference between the moen 1222 vs 1222b replacement cartridges. They are both the replacement part cartridge for the posi temp moen shower valve. They are made from the same parts, the only difference is their packaging and model number. The “b” in the 1222b model number stands for bulk.
Where Do I Find My Faucet Model Number?
Identifying Your Faucet Model
- The model number is printed on a tag that is attached to the cold water supply line of the faucet.
- The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet.
- The model number, or part number, is typically preceded by “P/N.”
How do i identify my faucet brand and model? To determine a faucet brand, look on the faucet for a logo or model number, which might be small and hidden around the curves of the faucet or handles. Try cleaning the faucet off first so it’s easier to spot the logo or model number.
How do i find my moen faucet model number? Exact model numbers can be found on your box or on your instruction sheet. If unavailable, you may find the general family series number on the back of the spout (non pullout).
How do i identify my sink faucet? The model number is printed on a tag that is attached to the cold water supply line of the faucet. The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet. The model number, or part number, is typically preceded by “p/n.
Where is the serial number located on a kitchen faucet? If your faucet is a non-pullout model, the general family series number should be located on the back of the spout. Note that the number on the back of the spout is not the actual model number. It is a serial number.
How Do I Know What Faucet Cartridge I Need?
Use a caliper or ruler and measure the cartridge. Do this by measuring from the base to the tip (from seat to splines). Pay attention to the length tier of your cartridge (lengths range from 1–12).
How do i identify my kitchen faucet cartridge? Manufacturer logos. The quickest solution is to look for the manufacturer’s logo or name. Name or model of a brand can be found pretty much anywhere so it is helpful to clean your faucet handles, escutcheon, spout, decorative rings, etc.
How do i find my moen cartridge number? If not the series number can be usually be found on the underside of the faucet or on the decorative escutcheon ring that goes around it. The second way to identify your moen valve cartridge is to remove the old one. You will do this by first shutting off the hot and cold water feed to your shower.
How Do I Know What Bathroom Faucet I Have?
The most obvious and quickest solution is to look for a logo — the manufacturer’s symbol — that identifies its faucets. Each manufacturer has a distinctive logo that sometimes appears on the escutcheon — the plate beneath the faucet — the body of the faucet, the spout itself or somewhere on the handle.
How Do I Identify My Kitchen Faucet?
How do i identify my kitchen faucet? Locate the logo one of the most obvious and easy (sometimes) ways to identify the kitchen faucet brand is by the logo. Each manufacturer has its own unique logo that is stamped onto some part of the faucet. Check the plate beneath the faucet, which is called the escutcheon, for the logo.
How Do I Know If I Have a Moen 1222 or 1225?
To tell if you need a 1222 or 1225 moen cartridge, check how your faucet turns on the water. If you need to pull out the handle you need the moen 1225 cartridge while if you only need to rotate it to adjust the water temperature you need the moen 1222 cartridge.
How can you tell the difference between moen 1222 and 1225? The biggest difference between the moen 1222 vs 1225 cartridges is how the shower valve handle turns the water on. Shower valves with the moen 1225 cartridge are turned on by pulling the handle out and then adjusting the temperature by turning the handle to the left or right for hot or cold water.
Are All Moen Mixing Valves the Same?
For many years moen tub/shower valves have been manufactured using one of three valves. These valves are standard, posi-temp and moentrol. Although the look is similar, the trim is not necessarily interchangeable.
Are all moen valves compatible? Moen has manufactured many types of shower rough-in valves including four types single handle shower valves. The trim kits are not interchangeable. It is important to identify which valve is currently installed by looking at the escutcheon screw location and the handle operation.
Are mixing valves interchangeable? You can identify the manufacturer of the shower valve you have by removing and checking the cartridge for the brand name. Do not try to mix and match with manufacturers when it comes to shower faucet and valve parts. The different brands’ faucet and valve types and sizes are not interchangeable.
Are shower mixing valves interchangeable? Shower valves are not interchangeable. When you buy a shower valve kit, everything is compatible and made by the same manufacturer. They are sold this way because many shower valves made by the same manufacturer are not compatible, let alone another company’s valve.
How do i know what moen valve i have? If not the series number can be usually be found on the underside of the faucet or on the decorative escutcheon ring that goes around it. The second way to identify your moen valve cartridge is to remove the old one. You will do this by first shutting off the hot and cold water feed to your shower.
How Do I Know What Faucet Valve I Have?
Look at the center of the trim plate behind the shower handle to find a brand name or manufacturer symbol. If you see a “k,” the faucet is a kohler unit; an “m” signifies moen. American standard, delta and price pfister typically print their entire name on the faucet itself.
What type of valve is in a faucet? Ball valve ball valves are used in single-handle faucets and are also relatively inexpensive. The primary component of a ball valve is a steel ball that contains a network of grooves and holes. These grooves and holes align with the hot and cold water inlets.
How Do I Identify My Moen Valve?
Look closely at the handle buttons that were attached to the shower valve. Typically, “moen” will be written in the middle of the “hot” and “cold” buttons. If you do not see this, the handle buttons have been replaced, or the “hot/cold” button is a lever (wall escutcheon).
What is the difference between moen 1222 and 1225? The main difference between the moen 1222 and 1225 cartridges is that faucets with the 1225 cartridge have water volume control while faucets with the1225 cartridge don’t.